After the micro DSM2/DSMX and the micro Flysky, here is the 1g FrSKy D8 version: http://www.banggood.com/2_4G-8CH-Micro-Frsky-D8-Compatible-Receiver-With-PPM-SBUS-Output-p-1104843.html
1g version for an avergage of 300-400m far to reach the excellent performance of a genuine FrSky D4R-II but largely enough for a microFPV racers.
The photo is not contractual since we can recognize the A7105 RFchip instead of the CC2500.
Item Name: 2.4G micro receiver
PPM Output: Yes
Operating Voltage: 5V
Antenna Length: 30mm
Compatibility: Compatible with Frsky D8 series transmitter
How To Bind:
1, Use soldering iron to shorted solder joint of BIND,the supply power to the receiver,blue LED blinks fast means entering the binding mode.
2,Press and hold the binding button on the transmitter, in the meantime,turn on the transmitter,wait about 1 second,the blue LED stay on,means binding has succeed. Disconnected the solder joint of BIND.
3, Disconnect the receiver power supply,turn off the transmitter,re-supply power to the receiver,finally turn on the transmitter.
4, Blue LED blinks fast means receiving signal,blue LED light turn off means no signal.
1x 2.4G 8CH Micro Frsky Compatible Receiver