NEWS: Eachine Aurora 68 (48g, F3 omni+BF OSD, 10A BLheli_S/Dshot600, 1102/11500Kv)

Want a shrinked (and hope fixed) version of the Eachine Aurora 90 ?. Here is the 68mm version: The new model keeps exactly the same electronic ingredients except for motors, now we have smaller and lighter 1102/11500Kv but still 2S compatible. The other elements remain the same: eachine minicube with F3 omni+betaflightOSD, 4-in-1 10A BLHeli_S Dshot600 ESC and for the last layer one of these three choices of receiver: FrSky D8,Spektrum DSM2/X and FlySky AFHDS-2A. If of the new version they solved the three known problems of the EA90: Prop hitting the aluminium standoff, some drifts in angle mode and some sudden up-tilt after hard turns, the new EA68 can be a fantastic indoors and indoors flyer. Probably a direct comptitor of the new Emax Babyhawk. Announced flight time is poor … only 3min despite a 400mAh LiPo.. Strange. I guess the final total weight will be around 70g. Let’s cross finger and wait & see. I will ask to review one 🙂








Brand Name: Eachine
Model: Aurora 68
Item Name: Eachine Aurora 68 68mm Mini FPV Racing Drone
Wheelbase: 68mm
Size: 93mm*93mm*50mm

Weight: 48g( battery not include)

Receiver: ( Optional)
-Specktrum DSM2/DSMX Compatible receiver
-Flysky 8ch AFHDS2A receiver
-Frsky SBUS D8 mode receiver (RSSI Output)

Motor: Eachine 1102 KV11500 brushless motor
ESC: 10A BLHELI_S 16.5 1-2S 4 in 1 ESC Dshot600
Propeller: 38.1mm 4-blades propeller
Camera: 600TVL HD CMOS 1/4 inch
VTX: 5.8g 25MW 48CH NTSC/PAL video transmitter
Flight Control: Minicube F3 Flight controller built-in OSD
OSD: Betaflight OSD
Firmware of flight controller: Betaflight 3.1
Flight time : 3 minutes
Rear LED Ready (LED_Strip function)
Buzzer Ready
Battery: 7.4V 400mah 40C lipo battery

Flight controller Specification:
-Mount hole: 20mm*20mm
-Processor: STM32 F303 MCU
-Sensor: SPI Sensor MPU6000
Built-in Betaflight OSD ( Batt voltage, RSSI , Artificial Horizon , Fly mode , -Flytime, Craft name etz.)
-Firmware version: Betaflight 3.1 Dshot ready
-Target: OmnibusF3

ESC specification:
-Mount hole: 20mm*20mm
-Firmware version: BLHELI_S 16.5
-BB2, 48MHZ Chip
-Lipo Battery: 1-2S
-Con. Current: 10A
-Peak Current: 15A (10S)
-BEC: 5V @0.1A
-Programming: YES
-Betaflight passtrough ready
-Dshot600 ready(Default)
-Support oneshot42 oneshot125 Multishot Dshot
-Damped light on

-Extremely light and more powerful
-STM32 F303MCU + BLHELI_S ESC make your Operating feel more stabilly and silky
-Adjustable Angle of Camera
-Jaw-dropping flight performance
-Betaflight support
-Acro mode / Air mode /Angle mode support
-Built-in OSD(Using F3 MCU controls OSD over SPI bus in DMA mode)
-OSD Configuration has been include in BETAFLIGHT GUI
-Radio Stick to control PID Tunes
-BLEHELI_S pass-through ready
-Frsky Mode :Telemetry RSSI Output ready

Package Included:
1x Aurora 68 68mm Drone
1x Battery
1x Manual

1 Comment

  • Indy says:

    Looking forward to see your test!

    Nothing much to do with the Babyhawk, 85mm and 1105 5000kv motors though…

    Great all those tiny nano Racers, but flight time is an issue… I’m going to try higher C batteries and XT30 plug… at least to try to get rid of the buzzer after 2 minutes.

    I’ve done one of my best fly yesterday with a GT2 Crusader 200mm yesterday… 12 minutes!!! And only 6 minutes with the GT2 150!!! We should get better efficiency with smaller quads, but I don’t know how…

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.