NEWS: EACHINE LIZARD 105 camera & DVR firmware update

 

BE AWARE YOU CAN LOOSE ALL YOURS OSD INFORMATION AFTER FLASHING  THE  NEW FIRMWARE !!!!! DON’T FLASH THE NEW FIRMWARE IF YOU ARE NOT SURE OF THE VERSION YOU HAVE

IN ORDER TO LET APPEAR AGAIN THE OSD INFORMATION, SINCE THE FLASHING PROCEDURE RESET THE PAL/NTSC CONFIGURATION, BE SURE TO MACH THE CAMERA PAL/NTSC SETTING WITH THE ONE SELECTED IN BETAFLIGHT. TO CHANGE THE CAMERA PAL/NTSC SETTING, HOLD THE REC BUTTON WHILE TURNING ON THE QUADCOPTER.

 

 

At least for the first batches, the lizard 105S suffered from some (minors) problems. One of them was the Jello effect due to the free gap inside the metal camera housing. Now it’s fixed from the last batch. A new camera & DVR update is now also available improving the general brightness sensitivity relatively poor for the first machines. You can find here: L105S_CAMERA_V1.1

Just insert the .bin in the root folder of your microSD card. Don’t rename the file…. power the machine. The blue DVR light should be solid. When the light is off after 2-3mins, the flashing is done. Disconnect the battery and extract the microSD card. Eventually delete the .bin file if still present The .bin file is automatically deleted after flashing.

1 Comment

Leave a Comment