NEWS: Eachine QX95S

A new revision of the Eachine QX95 is announced by Eachine: https://www.banggood.com/Eachine-QX95S-with-F3-Betaflight-OSD-Buzzer-LED-Micro-FPV-Racing-Drone-Quadcopter-BNF-p-1218445.html
We still have a 8.5mmx20mm brushed machine but with some “black” variant, more powerfull. The F3 board is also upgraded with the presence of a builtin Betaflight OSD. The camera is also installed beneath and it’s possible to ajust the lens orientation. The FPV camera is a basic 1/4″ 600TVL model. 53.5g in total with 1S 450mAh. Notice it’s not a classic LiPo but a LiHv with higher voltage. A buzzer is here to find your lost machine and a led strip bar for racing application. Three type of receivers are proposed: a FrSKy D8, a FlySky AFHDS-2A and a specktrum DSM2/X. For the FrSky model, the RSSI is exported via telemetry. Well if motors are really upgraded… and since the total weight is acceptable, the machine should offer good performances acro compatible. Anyway, I didn’t see any upgrade on the carbon frame… where the tickness seems locked to 1mm…. not strong enough for a massive crash

null

null

null

null

null

null

null

Specification:
Brand Name: Eachine
Item NO.: QX95S
Size:90mm*93mm*20mm
Weight: 40.5g (Without battery)
53.5g (With battery)
Flight controller: Eachine AIOF3PRO_Brushed built-in OSD
Motor: Coreless 8520 Black Edition CW/CCW
Propeller: Ladybird 55mm CW/CCW 2-blades propeller
Camera: 600TVL HD CMOS 1/4inch
VTX: 5.8g 25MW 48CH NTSC/PAL Video transmitter
Battery: 3.8V 450mah Lipo battery(HV 4.35v)
OSD: Betaflight OSD
Firmware of Flight controller :Betaflight 3.2.0 (Target: Omnibus)
Flight time: 4 minutes (Battery voltage at 2.8v)

Features:
– More powerful Coreless motor
– Jaw-dropping flight performance
– Airmode/Angle/Acro mode support
– Adjustable Angle of Camera (0°~15°)
– Built-in Betaflight OSD
– Radio Stick to control PID Tunes
– LED_STRIP Ready
– Buzzer Ready
– Telemetry RSSI Output ready (Frsky version)
– V-bat Detector

Receiver Option:
– Frsky D8 mode SBUS Output 8ch With RSSI output (OSD display or X9D telemetry)
– Flysky compatible 8ch PPM receiver (AFHDS 2A Mode)
– DSM2/DSMX compatible Receiver

Compatible:
1.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D8 mode),and XJT (D8 Mode),DJT DFT DHT Transmitter.
2.Flysky Receiver Support FS-i4, FS-i6, FS-i6S, FS-i6X, FS-i10, FS-GT2E, FS-GT2G, FS-GT2F, Turnigy Evolution Transmitter.
3.DSM2/DSMX Receiver Support Spectrum/JR(DSM2/DSMX protocol) DEVO10/DEVO 7E(with deviation firmware).

Package Inlcuded:
1 x Eachine QX95S Frame Kit
4 x 8520 Black Edition Coreless Motor
1 x AIOF3PRO_Brushed Flight controller
1 x 5.8G VTX w/Camera antenna
8 x 55mm Propeller
1 x 3.8V 450mah Battery
1 x Charging cable
1 x LED_STRIP
1 x Buzzer
1 x Paddle propeller

6 Comments

  • Geppinho says:

    I love the original Qx95, but I have replaced the frame after crashes three times before switching for a different one. Hard to believe Eachine comes out with a revised version but doesn’t address its biggest weakness.

  • Anonymous says:

    This original model is about a year old. This new model does not bring any great new features ?

    Any idea when we will see a micro with built-in runcam split ? The video from runcam split looks very good. With so many micros on the market, I’m surprised Eachine hasn’t created a new micro with built-in runcam split. Do you know of any that are coming out soon or a link to somewhere I can buy a model already made. I did see loki-x3 REC model, but it was too expensive.

    • SeByDocKy says:

      There are some SPCmaker with such camera. For example the 95GL and the 90NG. Ok it’s expensive but you are right, I think some Eachine models will come soon with a good CCD camera

      • Anonymous says:

        the 95GL and 90NG do not have Runcam Split camera. The Split has very good 1080p/60 recording. The Split is only $80 so I don’t know why more micros are not coming out with the Split built-in.

Leave a Comment