NEWS: FXT FX888R triversity 5.8G 48CH groundstation

A new 5.8G 48CH receiver is proposed by FXT with the FX888R: https://www.banggood.com/FXT-FX888R-5_8G-6-Bands-48CH-Raceband-Triversity-Receiver-Built-in-12864-OLED-p-1195291.html.

It’s relatively a cheap triversity 5.8G ground station module which can be installed on a tripod. A small LCD screen shows the level strenght of each individual input channel. 4 AVout are here, one for each antenna and the fourth as result of the best signal computed from these three sources. No information about the RX sensitivity of each individual builtin receiver. Associated with directionnal high gain antennas with a beam of 120 degrees, all directions can be covered in theory. In the same category, some weeks ago was also annouced by Hobbyking such kind of machine but with a fourth input installed on top of the module for a proximity omnidirectional antenna.

null

null

null

null

null

null

Specification:
Input voltage: 7-28v
Current consumption: MAX330mA@12v
Antenna connector: SMA
AV out: earphone 2.5mm
OLED resolution: 128*64 pixels
Channels: 6 bands 48 channels
Frequency range: 5300-6000MHz
Dimension: 110x100x20mm
Weight: 97g(excludes antennas)

Features:
1. Built-in “3” receivers(patent pending),the three independent receivers can be turned on or turned off,it automatically receive best signal
2. Built-in OLED real-time display input voltage,signal strength and working channel
3. Easy to use buttons with channel autoscan
4. With 4AV output port,support mutiple AV OUT
5. Built-in tripod nut for easy installation on tripod
6. Power by 2s-6s battery
7. Plug and play
8. Three independent receivers can be turned on or turned OFF
9. Bands 48 channels with raceband
10. Three SMA antenna connectors

null

Package included:
1x FXT 5.8GHz 48CH Triversity Receiver
3x Antennas
1x RCA audio/video cable
1x XT60 power-in cable
1x User Manual

Leave a Comment