NEWS: GEPRC CinePro 4K HD

Want to see the rolls&royce of the cinewhoop ? Here is the GEPRC CinePro 4K HD advanced: https://www.banggood.com/GEPRC-CinePro-4K-HD-3-4S-FPV-Racing-Drone-Advanced-Version-PNPBNF-F722-FC-DUAL-Gyro-ICM20689-Camera-1200TVL-35A-ESC-5_8G-48CH-0500mW-VTX-p-1485843.html

The structure is the same as the former GEPRC but now including some ducted prop guards. Here we have a 120mm 4S cinewhoop machine with all ultimate electronics elements in the market: a new F7 board with a dual synchroneous IMU for ultra fast and accurate stabilization. Ideal for 4K shooting. This 4-in-1 ESC board integrates also some 35A BLheli32 6S compatible MOSFET !!!
The VTX IRC tramp compatilbe can output up to 500mW over 48CH in the 5.8G band. Let’s finish with the cream of the cream… a Builtin Caddx Tarsier able to shoot 4K videos and also able to broadcast a 1200TVL 10ms low latency FPV signal !!!. Thanks to full 3K carbon structure, the Cinepro 4K HD promised to be jello free and prop occlusion free …. With a 4S 650Mah LiPo, up to 4min of flight are advertised. With a standalond weight of 125g, expect to reach close to 200g with such battery…. Luckeky we are under the 250g limit. The GERPC is proposed in PNP or with two BNF version: i) FrSky R-XSR (D16/F-port) or ii) FrSky XM+ (D16/SBUS). Sold around 270USD !!!! it’s the most expensive Cinewhoop in the market. Wait & See ….

GEPRC-cinepro-4-K-1

GEPRC-cinepro-4-K-2

GEPRC-cinepro-4-K-3

GEPRC-cinepro-4-K-4

GEPRC-cinepro-4-K-5

GEPRC-cinepro-4-K-6

GEPRC-cinepro-4-K-7

GEPRC-cinepro-4-K-8

GEPRC-cinepro-4-K-9

Specification:

Frame:GEP-CX2(Improved version,Including Guards)
STABLE PRO F722 DUAL Gyro ICM20689
Camera:Caddx Tarsier 4K 1200TVL
Motor:GEP-GR1105 5000KV(4S lipo battery is Best)
Propeller:EMAX AVAN 2Inch or DalProp Q2035 4-blade
VTX 5.8G 500mW
Weight:Around 125g(without battery)
Flight Controller

Model:STABLE PRO F7 35A
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Firmware target: EXF722DUAL
Integrated LC Filter
Size: 26x26mm board, 20mm mounting holes (M2)
ESC BLheli_32 2-6S 4in1

MCU:STM32F051
Constant:35Amps
Burst:45Amps
Mounting Holes:20*20mm,M2
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1
5.8g 500mW VTX:

Input voltage: 5V
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol
Features:

HD Video Recording: 4K@30fps, 2.7K@60fps, 1080P@90fps.
Dual Camera System: 1200TVL FPV camera of competition-level, low latency within 10ms.
WIFI/APP support: Video recording parameters are adjustable by WIFI/APP.
Advanced Version: F722 Flight Controller, STABLE PRO F722 DUAL BL32 35A.
Black Box: 32Mb onboard flash memory.
500mW VTX Power: Effectively improves your flight distance.
Aerial Photography Friendly: No sight of propellers and propeller protection frames in your video.
Full Soft Mounted FC System: Provides a clean operating environment for gyro.
Say Goodbye to Jelly: Stable video, and comfortable FOV.

Improved GEP-CX2 Frame: Full 3K carbon fiber, 7075 aviation aluminum, High-pre cision CNC. Rugged and durable frame, Better protection for the 4K camera.
New Propeller Guard: Better airflow, Higher flight efficiency.
High Efficiency Motor: GEP-GR1105 5000KV Motors, 4S battery (450-650mAh) recommended.
Taillight Design: Eye-catching night view and lighting effects.
Exquisite Assembly Process: Eliminate any potential installation problems.

Package Included:
1 x CinePro 4K Advanced Version F722 FC FPV Racing Drone (PNP/BNF Optional)
1 x EMAX AVAN 2inch PROP(SET)
1 x DalProp Q2035 4-blade(SET)”>

The structure is the same as the former GEPRC but now including some ducted prop guard. Here we have a 120mm 4S cinewhoop machine with all last electronics elements: a new F7 board with a dual synchroneous IMU for ultra fast and accurate stabilization. Ideal for 4K shooting. This 4-in-1 ESC board integrates also some 35A BLheli32 6S compatible MOSFET !!!
The VTX IRC tramp compatilbe can output up to 500mW over 48CH in the 5.8G band. Let’s finish with the cream of the cream… a Builtin Caddx Tarsier able to shoot 4K videos and also able to broadcast a 1200TVL 10ms low latency FPV signal !!!.
Thanks to full 3K carbon structure, the Cinepro 4K HD promised to be jello free and prop occlusion free …. With a 4S 650Mah LiPo, up to 4min of flight are advertised. With a standalond weight of 125g, expect to reach close to 200g with such battery…. Luckeky we are under the 250g limit.
The GERPC is proposed in PNP or with two BNF version: i) FrSky R-XSR (D16/F-port) or ii) FrSky XM+ (D16/SBUS)

GEPRC-cinepro-4-K-1

GEPRC-cinepro-4-K-2

GEPRC-cinepro-4-K-3

GEPRC-cinepro-4-K-4

GEPRC-cinepro-4-K-5

GEPRC-cinepro-4-K-6

GEPRC-cinepro-4-K-7

GEPRC-cinepro-4-K-8

GEPRC-cinepro-4-K-9

Specification:

Frame:GEP-CX2(Improved version,Including Guards)
STABLE PRO F722 DUAL Gyro ICM20689
Camera:Caddx Tarsier 4K 1200TVL
Motor:GEP-GR1105 5000KV(4S lipo battery is Best)
Propeller:EMAX AVAN 2Inch or DalProp Q2035 4-blade
VTX 5.8G 500mW
Weight:Around 125g(without battery)
Flight Controller

Model:STABLE PRO F7 35A
MCU: STM32F722RET6
IMU: 2x ICM20689(SPI)
BlackBox: 32Mb onboard Flash
OSD: BetaFlight OSD w/ AT7456E chip
Firmware target: EXF722DUAL
Integrated LC Filter
Size: 26x26mm board, 20mm mounting holes (M2)
ESC BLheli_32 2-6S 4in1

MCU:STM32F051
Constant:35Amps
Burst:45Amps
Mounting Holes:20*20mm,M2
Supports Dshot1200,Proshot,Oneshot,Multishot
Current meter: Yes
Target: GEPRC-BL32-4IN1
5.8g 500mW VTX:

Input voltage: 5V
Channel: 48
Power transmission: 0mW(Pit mode) / 25mW / 100mW / 200mW / 400mW/ 500mW
Connector type: MMCX Connector
Traditional button
IRC Tramp protocol
Features:

HD Video Recording: 4K@30fps, 2.7K@60fps, 1080P@90fps.
Dual Camera System: 1200TVL FPV camera of competition-level, low latency within 10ms.
WIFI/APP support: Video recording parameters are adjustable by WIFI/APP.
Advanced Version: F722 Flight Controller, STABLE PRO F722 DUAL BL32 35A.
Black Box: 32Mb onboard flash memory.
500mW VTX Power: Effectively improves your flight distance.
Aerial Photography Friendly: No sight of propellers and propeller protection frames in your video.
Full Soft Mounted FC System: Provides a clean operating environment for gyro.
Say Goodbye to Jelly: Stable video, and comfortable FOV.

Improved GEP-CX2 Frame: Full 3K carbon fiber, 7075 aviation aluminum, High-pre cision CNC. Rugged and durable frame, Better protection for the 4K camera.
New Propeller Guard: Better airflow, Higher flight efficiency.
High Efficiency Motor: GEP-GR1105 5000KV Motors, 4S battery (450-650mAh) recommended.
Taillight Design: Eye-catching night view and lighting effects.
Exquisite Assembly Process: Eliminate any potential installation problems.

Package Included:
1 x CinePro 4K Advanced Version F722 FC FPV Racing Drone (PNP/BNF Optional)
1 x EMAX AVAN 2inch PROP(SET)
1 x DalProp Q2035 4-blade(SET)

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.