NEWS: Gofly-RC Falcon CP90Pro

A new compact 100mm brushless racer is announced by Gofly-RC: https://www.banggood.com/Gofly-RC-Falcon-CP90PRO-100mm-Mini-FPV-Racing-Drone-F3-OSD-25mW-100mW-40CH-VTX-Runcam-Nano-650TVL-p-1232700.html
The frame is pretty cool with the runcam nano FPV camera fully protected. For the electronic, classic ingredients, i.e. a F3 + OSD omnibus board, 4-in-1 20A BLheli_S/Dshort ESC board and 1104/7500Kv motors. Maybe we could expect some 1105 or even better 1106 variant to boost even more performances. Whatever, the announced setup should be 4S compatible even a 3S battery is advised. There are some programmable lights and a builtin Buzzer. The FPV section is based on a 25mW/100mW 40CH VTX. This CP90pro comes in PNP version so you will need to attached you own receiver with serial/PPM connexion. No information about the thickness of the frame but look like something around 3mm from the photos.

null

null

null

null

Specification:
Brand name: Gofly-RC
Item name: Falcon CP90PRO
Wheelbase: 100mm
Size: 125mm*125mm*35mm
Weight: 72g(without battery)
Motor: 1104 7500KV brushless motor
ESC: 4in1 BLheli_S 20A (Include 5V BEC)
Power input: 2s/3s lipo battery
Propeller: 2inch(50.80mm)
Flight time: 4-5minutes
Compatible receiver: DSMX/DSM2/PPM/SBUS (package not including)
Camera: RUNCAM NANO 650TVL
VTX: 5.8G 25MW 100MW 40CH
FC: OMINIBUS F3 (Betaflight3.2.2, mounting hole: 20*20mm)
OSD: Betaflight OSD
LED navigation lights: Programmable RGB LED
Alarm Buzzer: 75db
Input plug: XT30

Notes: this is the PNP version, it doesn’t come with the receiver, charger, receiver or remote control.

Package included:
1x Falcon CP90PRO mini FPV racing drone PNP
2x pairs propeller
4x propeller protective guard

1 Comment

Leave a Comment