NEWS: HBRC HBX64, a 64mm 2S Tinywhoop w/ 0802 motors

Want a 2S 65mm brushless tinywhoop with the new 0802 motors ? Here is the new HBRC HBX64 for you: https://www.banggood.com/HBX64-1-2S-64mm-Micro-Whoop-RC-FPV-Racing-Drone-F3-OSD-S0802-Motor-25-200mW-800TVL-p-1449239.html
Ok ok…. the electronic elements are old now….: a basic F3 board with at least a builtin betaflight OSD, an external serial based receiver (FrSky D8 w/ RSSI, FlySky AFHDS-2A and Spectrum DSM2/X). For the ESC… a 4-in-1 solution up to 10A, so no problem to handle 2S voltage. They are also Dshot 600 compatible. In the other hand, no control via the OSD for the VTX …. There is also a VTX control via smart audio… Not so bad. This latter got 48 channels and is able to output up to 200mW. The FPV camera is a basic CMOS 800TVL model… Of course no HD recording coming with….. but !!!! this machine weights only 24.5g (probably 26g with the receiver installed). The HBX64 is annouced to not exceed 40g (in 1S i guess) so should be around 47-50g in 2S setup. So nothing extraordinary but it’s small and powerfull in 2S so compatible for both indoors and outdoors applications

HBRC-HBX64-1

HBRC-HBX64-2

HBRC-HBX64-3

HBRC-HBX64-4

HBRC-HBX64-5

HBX64 1-2S 64mm Micro Whoop RC FPV Racing Drone F3 OSD S0802 Motor 25-200mW 800TVL

Specification:
Item name: HBX64 1-2S micro whoop FPV racing drone
Wheelbase: 64mm
Weight: about 24.5g (without battery)
Rec.flight weight: <40g (with battery)
Flight time: 3-6mins (2S 250-450mAh)
Flight controller: 1-2S F3, built-in OSD & smartaudio, OMBS firmware
ESC: 1-2S 10A BLHeli_S Dshot600
Motor: 1-2S S0802 16000KV
Propeller: 31mm 4-balde
VTX: 0/25/100/200 48CH
Camera: 800TVL FOV 150°
Receiver: PNP without receiver/ BNF FS-RX2A/ BNF DSMX Pro/ BNF FrSky D8 receiver (option)

Package included:
1x HBX64 1-2S micro whoop FPV racing drone PNP/BNF

2 Comments

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.