NEWS: JJRC P130, the little small brother

Whaoooh the shrinked version of the P175-P200 is announced here: http://www.banggood.com/JJRC-JJPRO-P130-FPV-Quadcopter-with-CC3D-FPV-800TVL-Camera-5_8G-25mW-40CH-Transmitter-ARF-RTF-p-1082118.html

null

null

null

Description:
Brand Name: JJRC
Item Name: JJPRO-P130 Racing Drone
Model: P130

Motor
Model: X1806-16T
KV: 2300
MAX Thrust: 200-350G
Max. Current: 13A
Lipo(S): 2-3S
Height: 21.5MM
Diameter: 23MM
Propeller: 3 inch(3045)
Weight: 17G

ESC
Brand: Flycolor
Model: Fairy-12A
Continuous Current: 12A
Instantaneous Current(10S):18A
BEC: 5V/1A
Input Voltage: 2-4S
Weight: 9.5G
Size(without plug): 28x15x6mm
Typical Applications (for reference): 200-330 Multi-rotor

Transmitter
Brand: Flysky
Model: FS-i6
Channels: 6 Channels
Model Type: Glider/Heli/Airplane
RF Range: 2.40-2.48GHz
Bandwidth: 500KHz
Band: 142
RF Power: Less Than 20dBm
2.4ghz System: AFHDS 2A and AFHDS
Code Type: GFSK
Sensitivity: 1024
Low Voltage Warning: less than 4.2V
DSC Port: PS2;Output:PPM
ANT length: 26mm*2(dual antenna)
Weight:392g
Power: 6V 1.5AA*4
Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
Size: 174x89x190mm
Color: Black
Model Memories: 20

Flight controller
Model: CC3D
Size: 3.6cm*3.6cm
Weight(wiht line): 11G

Camera
Image Sensor: 1/3ÿ CMOS
Resolution: 800TVL Lens
Angle: 150°
Signal System: NTSC/PAL(One key switch)
Power Consumption:380mA@3·7V
Power Supply: 3.6-5.5V
Lens Diameter: 2.1mm IR coated FOV150°

Image Transmission
Signal System: NTSC/PAL
Output Impedance: 75 Ohm
Intensity of the output signal: 12-14dB
Output Power: 25mW
Wireless Channels: 40CH
Operating Voltage: 2·7-5·5v
Power Supply: 370mA@3.7V
Size: 18mmX16.5mmX8mm(without antenna)
Weight: 6.8G

Package Included:
ARF Version:
1 x JJPRP P130 Frame Kit
4 x X1806 2300kv Motor
4 x 12A ESC
8 x Propellers
1 x CC3D Flight controller
1 x Section Board
4 x LED Lights
1 x 5.8G Image Transmitter(with CMOS 800TVL Camera)
1 x 11.1V 850mAh Battery
1 x Screwdriver

RTF Version:
1 x JJPRP P130 Frame Kit
4 x X1806 2300kv Motor
4 x 12A ESC
8 x Propellers
1 x CC3D Flight controller
1 x Section Board
4 x LED Lights
1 x 5.8G Image Transmitter(with CMOS 800TVL Camera)
1 x 11.1V 850mAh Battery
1 x Screwdriver
1 x FS-i6 Transmitter/Receiver

null

null

The CC3D board is installed … 🙁 It would have been better a SPF3 maybe a future revision will include it.
The cloverlead is installed front too … Hope the battery won’t destroy it during a crash

1 Comment

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.