NEWS: RealAcc Real 5

A new racer from RealAcc in 215mm PNP format with the Real 5 model: https://www.banggood.com/Realacc-Real5-215MM-FPV-Racing-Drone-PNP-Omnibus-F4-30A-Blheli_S-ESC-25200600mW-VTX-800TVL-Camera-p-1279364.html
Massively carbon based with 4mm arms, the Real 5 integrates a F4 w/OSD board, a 800TVL CCD camera, strong 30A ESC BLheli_S/Dshot 600 but limited to 4S setup. For the 5.8G VTX part, it’s based on a 48CH module with switchable output power: 25mW, 200mW and 600mW. No information if it’s support IRC Tramp protocol to control all VTX settings via the OSD. The circularized antenna is connected via a coaxial cable ending with a uFL connector. In case of crash on the antenna section, due to the location of the SMA connector in the rear section, it should resist well. The main central tower is tall enough for a future micro split mini combo… No really bad design failures can be guessed from this Real 5 machine. A lot of spare are provided in the bundle. Of course, wait & see….

Real_Acc_Real5_1

Real_Acc_Real5_10

Real_Acc_Real5_2

Real_Acc_Real5_3

Real_Acc_Real5_4

Real_Acc_Real5_5

Real_Acc_Real5_6

Real_Acc_Real5_7

Real_Acc_Real5_8

Real_Acc_Real5_9

Specification:
Brand name: Realacc
Item name: Real5 215MM FPV Racing Drone
Motor: 2206 2600KV

Frame Kit:
Wheelbase: 215mm
Arm plate: 4mm
Other board: 2mm

Omnibus F4 Flight Controller:
STM32F405
LC filter: YES
Replaceable Sensor: MPU-6000 with SPI Data Bus or Next-Generation Sensor ICM-20608G
Support D-Shot ESC
Lipo 2-4S input,
Built-in 1.5A
BEC
DFU button
Black box, maximum 16M data record
SBUS / PPM / Spektrum satellite
Support WS2812 light bar
Buzzer port
PCB 36 * 36mm
Mounting hole 30.5 * 30.5
Support RaceFlight BetaFlight

ESC:
4 in 1 integrated ESC
Current: 30A * 4
Maximum current: 35A * 4 up to 6S
Working voltage: 2-4S Lipo
Size: 36 * 36mm
Mounting hole: 30.5 * 30.5mm
Firmware: BLHeli_S
Support: Support Dshot150 / 300/600, Oneshot125 / 42, Multishot, PWM
Main IC: EMF8BB21F16G SILABS, 8bit C8051, run 50MHz

VTX:
Transmit power 3 block switch: 25mW / 200mW / 600mW
Channel: 48CH
Video format: NTSC / PAL;
Power consumption: 7V ~ 24V, + 12V / 260mA @ 600mW;
Small size: 36mm × 36mm × 5mm
Light weight: ≤ 6g (without antenna);
Connection is more stable: mmcx turn sam connector

Camera:
800TVL CCD 2.8mm lens
Size: 25mm * 25mm, Weight: 9.5g
Full format video format: NTSC / PAL; (default PAL)
Working voltage: DC5-12V
Operating current: 70mA (low power consumption)

Package Included:
1 X 215mm Frame Kit
1 x Omnibus F4 flight controller
1 x 4 in 1 30A ESC
4 x 2206 2600KV motor
1 x 25mW / 200mW / 600mW VTX
1 X 800TVL Camera

4 Comments

  • Benjamin says:

    Hi Seby,

    The famous BG coupon “Toysho” which has been working for several months seems not to work anymore … Despite it was still indicated on the FaceBook Banggood RC account 🙁
    Do you have any advice for getting reductions since you give us several BG links ? (Toysho was a 7% permanent reduction for all RC components or quads/plane on BG)

  • Krotow says:

    Seems they cloned DQuad Obsession frame again 🙂 At least if arm carbon aren’t screwed by wrong cutting direction then frame should be resilient against most crashes. From what I see, stock props are the same exploding garbage that came with Eachine Wizard X220. Throw them out and buy a pack of DALPROP T5040C (for racing) or T5045C or T5046C (for freestyle) or other good props suitable with 2206 motors. Then potential groundloop, if antenna mount is carbon and not textolite or other isolator. Also customers with a wish to upgrade camera can expect difficulties for cameras with two screws at one side. Interesting what they’d mean with replaceable gyro? Same gel cage for gyro as in Kakute F4 FC’s or Omnibus F4 Corners?

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.