NEWS: SPC Maker 95GF

After this SPC-95X, here is the new revvision of this 95mm brushless racer: https://www.banggood.com/SPC-95GF-95mm-Brushless-FPV-Racing-Drone-BNF-With-Omnibus-F3-4in1-BLheli_s-5_8G-48CH-600TVL-p-1174653.html
Versus the 95X, now we have CCD (instead of a classic CMOS sensor. It should improve considerably your FPV flights. The other electronic elements remains the same: F3 omnibus + OSD, 4-in-1 10 BLheli_S/Dshot 600 ESC board, 1104/7500Kv, 3S setup, buzzer, programmable rear light and four choices of receiver: Futaba SFHSS, FlySly AFHDS-2A, FrSky D16 W/ RSSI, and Spektrum DSM2/DSMX. The frame is ultra solide with 3mm arms…Announced with a total weight 105g with the 350mAh 3S LiPo. The bundle comes into a nice transportation bag and a spare battery. Potentially, it can be the best micobrushless in the market.

null

null

null

null

null

Specification:
Brand name: SPC Maker
Product model: SPC 95GF
Wheelbase: 95mm
Size: 76mm*87mm*50mm
Weight: 72g (without battery)
Flight weight: 105g (include battery)
Motor: SPC Maker S1104 7500KV brushless motor
ESC: Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Propeller: 50mm 4-blades propeller
Receiver: Frsky/DSMX/Flysky/Futaba(optional)
Camera: RunCam Micro Swift 1/3 “600TVL FPV camera 2.1mm lens CCD camera
VTX: 5.8g 25MW-200MW 48CH Video transmitter
Flight controller: OSDOminibus F3 flight controller integrated with OSD module
OSD: Betaflight OSD
Firmware of flight controller: Betaflight_3.1.0_OMNIBUS
Flight time: 4 minutes
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mAh 30C lipo battery

Ominibus F3 flight controller integrated with OSD module:
-Powered by MPU6000 sensor for quick response to acceleration, integrated with 5V/1A BEC and OSD module
(This is 6DOF version, no barometer and compass).
-Designed for small size FPV quads with a frame smaller than 280mm, especially ideal for quadcopters smaller
than 130mm to exhibits its advantages in small dimensions and multiple functions.
-It provides all the functions of F3 6DOF version, but weighs only 8 grams. The size is only 27*27mm. Mounting
hole size is 20mm (2.5mm hole).
-Designed for quadcopter with LC filter. It supports CF and BF firmware (Omnibus F3)
-STM32F3CCT6 microprocessor, 256K memory, MPU6000 sensor, SPI port, faster processing speed.
-Constant current: 10A*4 (maximum current: 15A*4, 5s)
-Supports 2-4S LiPo input.
-Built-in 5V 1A BEC.
-Supports popular receivers such as SBus, PPM, DSMX.
-Buzzer, programmable LED, voltage monitoring, HLHeli ESC.

4 in 1 BLheli_s ESC:
Input voltage: 2-4S LiPo and 2-4S HV LiPo
BEC Output: Not available
Constant current of a single ESC unit: 10A
Maximum current: 15A 5 second.
Dimensions: 27*27mm (main board)
31*31.5mm (including soldering pads and extruded part)
Weight: 6.3g
Firmware: BLHeli_s
Supports D-Shot, Oneshot, rotation directions.
Processor: SILABS EFM8BB21F16G
MOS FET: TPN2R703NL
Driver: new generation 3 in I MOS

Camera parameters:
Frequency band: 5362-5945MH
Channel: 48
Modulation type: FM
Select channel: switch
Channel display: CH1-CH8 channel display with 8 LEDs, and A-F frequency group display with 6 LEDs
Transmit power: 13±1dBm
Frequency control: PLL
All harmonic: Max-50 dBm
Frequency stability: ±100KHz(Typ.)
Frequency precision: ±200KHz (Typ.)
Channel disk failure: 1dB
Antenna port: 50 O
Input format: NTSC/PAL
SENSOR: PAL: 720×540/NESC: 640×480 1/4 ”
LENS ANGEL: H: 120 °/ V: 100 °
Baseband interface: P1, 27*2
Energy consumption: 200-215MA@5V DCIN
Supply voltage: 2.9-5, 5V
Operating temperature:-10?~+ 60?
Profile dimension: 14, 5 mm×12, 2 mm+14, 5 mm×12 mm

Compatible:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E (with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS (D16 mode), and XJT (D16 Mode), DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G, 7C-2.4G, T8FG, T10CG , T12FG.T14SG.

null

Package include:
1 x SPC Maker 95GF Frame
1 x Ominibus F3 flight controller integrated with OSD module
1 x Frsky/DSMX/Flysky/futaba(optional receiver)
4 x SPC Maker 1104 7500KV brushless motor
1 x Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
4 x 50mm 5-blades propeller CW
4 x 50mm 5-blades propeller CCW
1 x RunCam Micro Swift 1/3 “600TVL FPV camera 2.3mm lens CCD camera
1 x 5.8G 25mW-200mW 48CH VTX
2 x 11.1V 350mAh 30C lipo battery (comes without charger)
1 x WS2812 LED Board
4 x 3*100mm nylon band
1 x 12mm*150mm magic band
2 x 15mm*50mm back to back with 3M rubber magic belt
1 x XT60 female plug to XT30 male plug converter

9 Comments

  • Anonymous says:

    finally a micro with built in 200mW vtx !!

    Do you think the price is good compared to the Lizard95 ? Is it worth the extra $80 ?

  • Krotow says:

    Suspiciously similar to Storm Moby-X2 without camera side plates 🙂 I like this kind of frame. Seems I should get the frame and mentioned camera (already have 1104 motors and VTX03) and try to create mine.

    • SeByDocKy says:

      You want a 200mW VTX ? coz the new Bodclash F-08 (I will review very soon) includes a small DVR to record VGA+ videos … but is only 25mW.

    • Anonymous says:

      Yes, looks a little similar to x2. Hopefully GF will 95GF will be as good as x2 in terms of quality product and flying characteristics.

  • Anonymous says:

    Hi SeByDocKy,

    just read your comment. Would you buy Lizard95 or SPC 95GF ?

    WIll you be revieweing SPC 95GF ?

    • SeByDocKy says:

      Hard to advise … between both… The SPC-95GF can be slightly ahead in term of camera quality and VTX output power but problably is more heavier too … I should review when it will be available.

Leave a Comment