NEWS: SPCMaker 90NG, the F4 omnibus w/OSD version with 28A ESC !!!!!

As you read recently, my last SeByDocKy’award was given to the SPCmaker 95GL…. I was expecting to see a F4 version… and just few days later is announced the F4 ominibus FC and of course still with the excellent Runcam microSwift CCD FPV camera:
https://www.banggood.com/SPC-Marker-90NG-90mm-FPV-Racing-Drone-With-Omnibus-F4-NANO-28A-4-in-1-BLheli_s-5_8G-48CH-VTX-BNF-p-1193566.html

It’s more or less the same strong chassis with 3mm of tichkness 3K carbon… just slightly more smaller a 90mm instead of a 95mm but the total weight is more or less the same, about 105g with the battery. Now the F3 omnibus is replaced with the F4 version but still with the builtin OSD :)… Motors are still 1104/7500Kv 3S compatible but now the 4-in-1 ESC board is a 28A model !!!! no problem to support 4S. It will be insane …. Still four choices of receiver: FlySky AFHDS-2A, Futaba FASST, Spektrum DSM2 and FrSKy D16 w/ RSSI….. The 48CH VTX still offers the possibility to switch between 25mW and 200mW for long range FPV flights. This new SPC maker can be my next award ??? 🙂 probably yes especially if motors can handle 4S.
Wait & See.

null

null

null

null

null

null

Specification:
Brand name: SPC Maker
Item name: SPC 90NG
Wheelbase: 90mm
Material: 3k full carbon fiber
Bottom plate thickness: 3mm
Top plate thickness: 2mm
Priduct size: 75mm*89mm*25mm
Weight: 73g (without battery)
Take off weight: 105g (with battery)
Brushless motor: SPC Maker S1104 7500KV motor
Flight controller: Omnibus F4 NANO
ESC: 28A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
Receiver: DSMX/Frsky/Flysky/futaba receiver (option)
Propeller: 50mm 3-blades 2035 propeller
Camera: RunCam Micro Swift 1/3 “600TVL FPV camera 2.3mm lens CCD camera
VTX: 5.8g 25MW-200MW 48CH Video transmitter
Flight time: about 4mins
Rear LED Ready( LED_Strip function)
Buzzer Ready
Battery: 11.1V 350mah 30C lipo battery

Compatible Receiver:
1.DSM2 Receiver Support Spectrum/JR(DSM2 protocol) DEVO10/DEVO 7E(with deviation firmware).
2.Frsky Receiver Support FRSKY taranis X9D/X9D PLUS(D16 mode),and XJT (D16 Mode),DJT DFT DHT Transmitter.
3.Flysky Receiver Support FS-I6FS-I6X.FS-I6S.FS-TM8.FS-TM10.FS-I10 and other second-generation AFHDS 2A protocol remote control
4.Futaba Receiver Support TM7,TM8, TM10, TM14 T6EX-2.4G,7C-2.4G,T8FG,T10CG ,T12FG.T14SG.

Parameters

Package included:
1x SPC Maker 90NG frame kit
1x Omnibus F4 NANO flight controller
1x 28A Mini 4 in 1 BLheli_s ESC (2-4S LiPo)
1x DSMX/Frsky/Flysky/futaba receiver (option)
4x SPC Maker 1104 7500KV motor
4x 50mm 3 blade propeller CW
4x 50mm 3 blade propeller CCW
1x RunCam Micro Swift 1/3 “FPV camera 2.3mm lens CCD camera
1x 5.8g 25MW-200MW 48CH VTX
2x 11.1V 350mAh 30C lipo battery (comes without charger)
1x WS2812 LED Board
4x 3 * 100mm nylon band
2x12mm * 150mm magic band
2x15mm * 50mm back to back with 3M rubber magic belt
1x XT60 female plug to XT30 male plug converter

4 Comments

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.