NEWS: SPCMaker SPC-K25, a 110mm version (and jellofree ?) of the SPC-K1

Remember my last SPCMaker SPC-K1 review ?. Here is a 110mm version of this model, i.e. the SPC-K25:
We have exactly the same electronic ingredients: a F4 + BFOSD flight controller, strong 4S compatible 20A BLheli_S/Dshot600 ESC, 1106/6000KV motors and !!!! a buitlin Runcam Split Mini 2 (RCSM2) to shoot 1080p@60fps HD videos while broadcasting with low latency the FPV analog signal. For the SPC-K1 a lot problems have been reported. The more important one is the presence of Jello. SPCMaker will send me a fixed frame for the K1 but good news at least with this K25, out of the box no jello can be noticed according to the following video. In another hand, the VTX is still none smartaudio compatible, no direct control of the runcam split mini 2 with radio and main probably the FrSky XM+ receiver won’t be flashed with the firmware exporting the RSSI for the OSD. The frame is now larger 110mm versus 95mm so about 10 extra grams can be noticed. Arms are also now 3mm. Wait & see but from now there are lot of new FPV racers directly integrating a RCSM2 or a Caddx Turtle 2. The competition will be rude….







Brand name: SPCMAKER
Item name: K25 FPV Racing Drone

Flight Controller:
Firmware: Omnibus F4
Input Voltage: 2-4S Lipo
BEC: 5.1V@1.2A
Size: 27x27mm
Mount holes: 20x20mm
Weight: 3.5g

ESC: 20A Mini 4in1 BLheli_S 2-4S Lipo
Current: 25A(Continuous Current)
Input Voltage: 2-4S Lipo
Size: 29x31mm
Weight: 4.9g

Motor: 1106 6000KV
Propeller: Emax AVAN Rush 2.5 Inch
Camera: RunCam Split Mini 2
VTX: 5.8G 25mW-200mW 40CH
Receiver: Frsky/Flysky/Futaba/DSMX(BNF Only)

Package Included:
1 x K25 Frame Kit
1 x F4 Flight Controller
1 x 20A 4in1 ESC
4 x 1106 6000KV Motor
2 x Emax AVAN Rush 2.5 Inch Propeller CW
2 x Emax AVAN Rush 2.5 Inch Propeller CCW
1 x RunCam Split Mini 2 Camera
1 x 5.8G 40CH VTX
1 x Receiver(BNF Only)
1 x Battery Strap
1 x Buzzer


Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.